मेरे प्यारे छात्र एवं छात्रा आप इस पोस्ट में यूपी पॉलिटेक्निक में द्वितीय सेमेस्टर में bteup 2nd semester general engineering syllabus के बारे पूरी जानकारी आपको मिल जायेगी जिससे आप अपनी पढाई अच्छे से कर पाएं। आप ये तो जानते ही होंगे की जनरल इंजीनियरिंग सब्जेक्ट में दो पार्ट होते हैं एक तो इलेक्ट्रिकल इंजीनियरिंग और दूसरा सिविल इंजीनियरिंग का पार्ट ये जो मैंने बताया है ये मैकेनिकल इंजीनियरिंग के छात्रों के लिए है क्योंकि सिविल और इलेक्ट्रिकल में जिस स्ट्रीम या ब्रांच में छात्र है वो सब्जेक्ट का पार्ट जनरल इंजीनियरिंग के सिलेबस में नहीं होता है उसके अलावा मैकेनिकल इंजीनियरिंग का पार्ट होता है। कहने का मतलब ये है की जो जनरल इंजीनियरिंग का सिलेबस मैं बताने जा रहा हूँ वो केवल मैकेनिकल इंजीनियरिंग के छात्रों के लिए है जोकि आपके bteup board के द्वारा ही मान्य है और आपको वही चैप्टर और टॉपिकों का अध्यन करना है।
जैसा की आपको पहले ही ऊपर बताया है की जो जनरल इंजीनियरिंग मैकेनिकल इंजीनियरिंग में चलती है उसमे दो पार्ट होते है पहला तो इलेक्ट्रिकल इंजीनियरिंग पार्ट जिसमे आपको इलेक्ट्रिकल इंजीनियरिंग के बारे में बेसिक जानकारी तो होती है साथ में प्रैक्टिकल भी कराया जाता है तथा दूसरा सिविल पार्ट जिसमे आपको सिविल इंजीनियरिंग के बारे में बेसिक जानकारी दी जाती है और इसके साथ साथ सिविल पार्ट का भी प्रैक्टिकल होता है। तो सबसे पहले देखते हैं की इलेक्ट्रिकल इंजीनियरिंग में आपके सिलेबस में क्या क्या है और आपको क्या क्या पढ़ना होगा।
Electrical Engineering Part : ( Section A )
इलेक्ट्रिकल इंजीनियरिंग पार्ट में आपको निम्नलिखित आठ चैप्टर पढ़ने होंगे। जिनके नाम निचे दिए हैं और आपको चैप्टर के अंदर कौन कौन से टॉपिक हैं अगर आप ये भी जानना चाहते यहीं तो आप निचे दिए गए वीडियो को भी देख सकते हैं।
उस वीडियो में मैंने बहुत ही अच्छे से समझाया है की आपको क्या क्या पढ़ना है।
1. Overview Of Dc Circuits -- Definition of basic terms, such as current, EMF, Potential Difference (PD); Ohm’s Law and its limitations; Factors affecting resistors and capacitors; simple, problems on series and parallel combinations of resistors with their wattage considerations. Application of Kirchhoff’s current law and Kirchhoff’s voltage law to simple circuits. Star – Delta connections and their conversion.
2. Dc Circuits Theorems -- Thevenin’s theorem, Norton’s theorem, application of network theorems in solving D.C. circuit problems.
3. Voltage and Current Sources-- Concept of voltage source, symbol and graphical representation characteristics of ideal and practical sources. Concept of current sources, symbol, characteristics and graphical representation of ideal and practical current sources.
4. Electromagnetic Induction -- Concept of electro-magnetic field produced by flow of electric current, magnetic circuit, concept of magneto-motive force (MMF), flux, reluctance, permeability, analogy between electric and magnetic circuit. Faraday’s laws of electro-magnetic induction, principles of self and mutual induction, self and mutually induced e.m.f, simple numerical problems. Concept of current growth, decay and time constant in an inductive (RL) circuit. Energy stored in an inductor, series and parallel combination of inductors.
5. Batteries -- Basic idea of primary and secondary cells , Construction, working principle and applications of Lead-Acid, Nickel- Cadmium and Silver-Oxide batteries , Charging methods used for lead-acid battery (accumulator ) , Care and maintenance of lead-acid battery , Series and parallel connections of batteries , General idea of solar cells, solar panels and their applications, Introduction to maintenance free batteries
6. AC Fundamentals -- Concept of alternating quantities , Difference between ac and dc , Concepts of: cycle, frequency, time period, amplitude, instantaneous value, average value, r.m.s. value, maximum value, form factor and peak factor. Representation of sinusoidal quantities by phasor diagrams. Equation of sinusoidal wave form for an alternating quantity and its derivation , Effect of alternating voltage applied to a pure resistance, pure inductance and pure capacitance.
7. AC Circuits -- Concept of inductive and capacitive reactance , Alternating voltage applied to resistance and inductance in series. Alternating voltage applied to resistance and capacitance in series. Introduction to series and parallel resonance and its conditions , Power in pure resistance, inductance and capacitance, power in combined RLC circuits. Power factor, active and reactive power and their significance, definition and significance of power factor. Definition of conductance, susceptance, admittance, impedance and their units , Introduction to polyphase a.c. systems, advantages of polyphase system over single phase system. Relations between line and phase value of voltages and currents for star and delta connections and their phasor diagram, power in polyphase circuits.
8. Various Types Of Power Plant -- Brief explanation of principle of power generation practices in thermal, hydro and nuclear power stations and their comparative study. Elementary block diagram of above mentioned power stations
Civil Engineering Part : ( Section B )
आप अगर आप वीडियो के माधयम से जनरल इंजीनियरिंग का सिलेबस देखना चाहते हैं और इसके साथ साथ आप इस विषय में महत्वपूर्ण टॉपिक्स के बारे में भी वीडियो में बताया है। तो आप ये वीडियो देख सकते हैं।
Practicals of General Engineering-
अब आप जनरल इंजीनियरिंग के बारे में पूरी जानकारी और सिलेबस के बारे में पूरी जानकारी तो पता चल ही चूका है तो अब ये भी जान लेते हैं की आपको जनरल इंजीनियरिंग में आपको कौन कौन से प्रैक्टिकल कराय जाते और आपको ये आने भी चाहिए।
1. Operation and use of measuring instruments like voltmeter , ammeter , CRO ,Wattmeter, Multi Meter and some other accessories
2. Determination of voltage and current relationship in a dc circuit under specific physical conditions to draw calculation
3. Measurement of resistance of an ammeter and a voltmeter
4. Verification of dc circuits:
a. Thevenin’s theorem,
b. Norton’s theorem,
5. Observation of change in resistance of a bulb in hot and cold conditions, using voltmeter
and ammeter.
6. Verification of Kirchhoff's Current and Voltage Laws in a dc circuit
7. To find the ratio of inductance of a coil having air-core and iron-core respectively and to
observe the effect of introduction of a magnetic core on coil inductance
8. Charging and testing of a lead - acid storage battery.
9. Measurement of power and power factor in a single phase R-.L-.C. circuit and
calculation of active and reactive powers in the circuit.
10 Verification of line to line and line to neutral voltages and current in star and delta
connections.
11. Study of green energy
12. Testing of bricks
a) Shape and size
b) Soundness test
c) Water absorption
d) Crushing strength
13. Testing Of Concrete
a) Slump Test
b) Compressive Strength of Concrete Cube
14. Students Visit to a near by like as Power Stations and many differents sites to show them various construction materials, concreting process and construction of RCC structural elements etc.
यूपी पॉलिटेक्निक में प्रथम सेमेस्टर का सिलेबस जान्ने के लिए क्लिक करे -- BTEUP First Semester Syllabus for all branches
आशा की आपको जनरल इंजीनियरिंग के सिलेबस के बारे में पूरी जानकारी मिल गयी होगी। अगर आपका कोई सवाल या सुझाव हो तो हमे अवश्य बताये।
0 टिप्पणियाँ